What is my GoVIEW login

Two-Factor Authentication (2FA) Setup Guide for GoVIEW

This section will outline the how to setup two-factor authentication (2FA) for eMajor students.

This section will provide information on the following:

• Introduction to Two-Factor Authentication (2FA)
• What You'll Need
• Setting Up Two-Factor Authentication
• Resetting or Changing Your 2FA Setup
• Support Contacts
• FAQ
• Troubleshooting
• Security Best Practices
• Authenticator Instructions
  • Microsoft Authenticator
  • DUO Mobile Authenticator
  • Google Authenticator

Two-Factor Authentication (2FA) adds an extra layer of security to your GoVIEW account by requiring a second form of verification. This guide will help you set up 2FA on GoVIEW using a supported authenticator app, such as:

• Microsoft Authenticator
• DUO Mobile Authenticator
• Google Authenticator

You may use any TOTP-compatible app, including one you already use for your home institution accounts.

Additionally, D2L has added email support for 2FA. This will allow you to receive 2FA codes via your registered email address. Instructions for setting this up are also included below. Please note that it is possible to have an authenticator app and email 2FA enabled simultaneously. Setting up both methods gives greater flexibility and provides a backup method if one method is not available.

Before starting, ensure you have:

• Two Devices
  • A smartphone or tablet with an authenticator app installed (e.g., DUO Mobile, Google Authenticator, Microsoft Authenticator).
  • A second device, such as a desktop computer or laptop, to access your GoVIEW account during the setup process.
• An active GoVIEW account.
• A stable internet connection.
• Access to the email address associated with your GoVIEW account (for the email-based 2FA option).

First-Time Setup (Upon Login)

When you log into GoVIEW for the first time, you will be prompted to set up Two-Factor Authentication.

1. Log into GoVIEW.
2. A window will appear with a QR code.
3. Open your authentication app and select "Add account" or "Scan QR code."
4. Scan the QR code displayed on GoVIEW.
5. Enter the 6-digit verification code generated by the app into GoVIEW.
6. Confirm back up of personal code displayed below QR code.
7. Click "Enable Authenticator" to complete the setup.

Note: You may skip the setup up to 5 times, but it will become mandatory after the fifth login attempt.

Setting Up 2FA via Account Settings

To set up 2FA later, follow these steps:

1. Log into GoVIEW.
2. Click on your profile icon in the top-right corner.
3. Select "Account Settings."
4. Locate the "Two-Factor Authentication" section and select "Enable Two-Factor Authentication".
5. A window will appear with a QR code.
6. Open your authentication app and select "Add account" or "Scan QR code."
7. Scan the QR code displayed on GoVIEW.
8. Enter the 6-digit verification code generated by the app into GoVIEW.
9. Confirm back up of personal code displayed below QR code.
10. Click "Enable Authenticator" to complete the setup.

Email-based Two-Factor Authentication (2FA)

Email-based 2FA is now available for GoVIEW. The instructions below describe how to set email 2FA up upon login or through your account settings after logging in. Please note that it is possible to have an authenticator app and email 2FA set up simultaneously. Setting up both methods gives greater flexibility and provides a backup if one method is not available.

Setting up Email-based 2FA upon Login

1. When prompted to set up 2FA, select the email authentication tab, and then select Send Code to Email.
2. Retrieve the code from your email and enter it in the Code field. Select Check Code. If you receive a green check and message indicating the code was entered correctly, select Enable Authenticator.

Setting up Email-based 2FA via Account Settings

1. Select your name in the top right of the screen and select Account Settings.
2. You should see the option for Two Factor Authentication Email. Select Enable Two Factor Authentication.
3. In the pop-up window, confirm your correct email address is listed and select Send Code to Email. Enter the code in the Code field and select Check Code. If you see a green check mark and message indicating it was correctly entered, select Enable Authenticator.
4. You should now see a confirmation message indicating Email-based 2FA has been successfully set up.

Logging into GoVIEW Using Email-based 2FA

When prompted for 2FA upon login, select the button to Send Code to Email. Retrieve the code from your email, enter it in the Verification Code field, and then select Login.

If You Still Have Access to Your Original Device:

1. Log into GoVIEW using your username, password, and authentication code.
2. Go to "Account Settings."
3. Find "Two-Factor Authentication" and select "Disable 2FA."
4. Follow the setup instructions again using your new device.

If You Lost Access to Your 2FA App or Device:

1. You will need to contact support to reset your 2FA setup.
   • USG eCampus Helpdesk
     Phone: 678-839-5300
     Toll Free: 855-9eMajor (855-936-2567)
     Email: ecore@ecampus.usg.edu
   • D2L Helpdesk (After Hours Support)
     Phone: 1-855-772-0423
     D2L Helpdesk Support
2. Once reset, log in and follow the initial setup steps to reconfigure 2FA.

• USG eCampus Helpdesk
  Phone: 678-839-5300
  Toll Free: 855-9eMajor (855-936-2567)
  Email: ecore@ecampus.usg.edu
• D2L Helpdesk (After Hours Support)
  Phone: 1-855-772-0423
  D2L Helpdesk Support

QR Code Issues:

If the QR code doesn't scan, manually enter the secret key provided by GoVIEW into your authentication app.

Time Synchronization:

Ensure your device's time is synced automatically, as 2FA codes are time-sensitive.

Use a Strong Password for GoVIEW to log into your account:

Ensure your password is unique and strong.

Avoid Sharing Codes:

Never share your authentication codes or backup keys with others.

Multi-Device Setup:

Consider setting up 2FA on multiple devices (e.g., phone and tablet) to avoid disruptions if one device becomes inaccessible.